Many people think of the old fashioned, hand rolling (RYO), when the subject of making your own cigarettes comes up, but there have been several advances in the world of make your own cigarettes that makes it easier, cheaper and faster than ever.
One of the best inventions in the make your own cigarettes world is the cigarette injector machine. Also known as the tabletop cigarette rolling machine, these very reasonably priced machines require only a few easy steps to create a cigarette that rivals any store bought commercial cigarette. This is by far one of the fastest and least expensive ways to make your own cigarettes that taste better than commercial brands and often times last much longer than store brands.
For these instructions, we're going to walk you through using a Top-O-Matic Cigarette rolling machine. This machine is made with metal parts and base, very sturdy, and should last for years with normal use and proper maintenance.
PLEASE READ THE INSTRUCTIONS BEFORE USING YOUR MACHINE. There are a couple of sharp parts that could cause injury if used incorrectly. You can also damage or outright break the machine if you do not use it correctly.
Step 1. - Make sure your machine is on a level surface, and the handle is set at the top of the machine (this will move the cutting lever out of the way).
Step 2. Take a handful of tobacco and place it just above the filling chamber. Loosen it up a bit with your fingers a little - no need to tear it all apart, you just want some separation.
Note: Your tobacco should be on the dry side. If it's too moist it can clog the machine and/or result in poorly packed cigarettes.
Step 3. Pull some of the tobacco into the chamber, filling the sides first, then the middle. Lightly press the tobacco down (don't push too hard). Stuffing too much tobacco in the chamber can break the crank on the machine.
Step 4. Grab a pre-made cigarette filter tube and stick it on the small brass tube that sticks out of the side of the machine on the left side. Grab the crank with one hand and the handle with the other. In one fluid motion, pull the crank toward you until it stops. Don't press down on the crank, and you should not need to use much force, if at all.
Give cigarette and tap on a flat surface a few times to pack (filter side down), and you're done!
If you feel a great deal of resistance, do not continue to pull the crank. You have probably put too much tobacco in the machine, and you will need to follow the manufacturer's instructions to clear it out.
That's it! You've just made your own cigarette. It takes just a few minutes to make a pack of cigarettes, and it can be done while watching TV. With a very small investment of money and time, you can start making your own cigarettes at 1/3 or less the cost of store bought cigarettes.
Make your own cigarettes are not safer than pre-rolled store bought cigarettes. The tobacco used may have less chemical additives and/or be natural, there are still health risks associated with all types of smoking.
Clicking the links below will open a new window on eBay with the details about each cigarette rolling machine.
Choose your country: | Change Sort Order: |
TOP O MATIC CIGARETTE MACHINE KING SIZE 100MM CIGARETTES BRAND NEW | $53.99 |
POWEROLL 2 Top O Matic Electric Cigarette Machine King Size 100mm NEW | $88.99 |
PoweRoll by TOP O Matic Electric Cigarette Machine | $82.44 |
PoweRoll by TOP O Matic King Size Electric Cigarette Machine | $81.95 |
TOP O Matic T2 Cigarette Maker Rolling Tobacco Injector Machine King 100s NEW | $54.95 |
sweet!!!! 😀
We Bought one and it broke the first time we used it , we have been rolling ciggs for over a year now, I am Hoping this is just a Fluke the other one we had was a top o matic to and it has been wonderfull, the store wont take it back because i did not have my receit even though we spend tons of monet there, so we r hoping the company will, in all Fairness will let you know ,
It probably was a fluke. We’ve used the same machine for a few years now. We did break one when we used excessively moist tobacco and stuffed too much in the machine, then used force to crank the handle.
Have you returned the warranty registration card? If you haven’t there would probably be a repair fee.